Kit Consists of two 2” Chop Brushes and one 1/8th x 1/8th Square Notch Trowel
1/8th x 1/8th Square Notch Trowel
This tool is exactly what we use to gauge the correct thickness of the epoxy we lay out on the surface of each of our Stone Coat Countertop projects. This will take the guesswork out of the process! We created this trowel out of necessity because it’s difficult to find this type of trowel at local hardware stores so we made it even better! You can set this trowel on end so the drips will run away from the teeth making it possible to use over and over. This is an all steel trowel which is lightweight and is easy to use. We design all of our products to work hand in hand with our Stone Coat Countertop system from wood slabs, to finished countertops this trowel will do the job. You can use the folded handle to remove drips as they gel up about 3-4 hours after the project has been poured.
2” Chop Brush:
This is the brush we prefer to use when chopping our Stone Coat Countertop epoxy as well as brushing edges. Clean with Acetone and remove any loose bristles before using. We have tested many types of brushes and this is our favorite!
Save time and money going to your local hardware store, our chop brush is less expensive than the big box hardware stores.
- Weight: 0.73 lb
- Width: 1.5 in
- Depth: 8.5 in
- Height: 4 in